| Item | Parameter |
| Panel Size | (1680-2650)*(992-1500)mm |
| Panel type | Glass-Backsheet&Glass-Glas type, Shingled type |
| Cycle Time | ≤22s |
| Number of J-box Storage | 120sets |
| J-box loading Mode | Manual Loading |
| Busbar shaping function | Yes |
| Conveying Height | 950±50mm |
| Soldering Mode | Hot pressure soldering or resistance soldering |
| Soldering quality inspection mode | CCD |
| Soldering temperature range | 350~370℃ |
| Temperature fluctuation range | ±10℃ |
| Number of axes | Single soldering head 3-axis |
| Soldering head service life | ≥3w次（with tin） ≥5w次（without tin） |
| Soldering position accuracy | ±0.5mm |
| Changeover time | ≤15min |
| Voltage | 3Phase 5 wire 380V,50Hz,AC±20% |
| Power | 40KW（with tin）35KW（without tin） |
| Air Pressure | 0.6-0.8Mpa |
| Exhaust | Yes |
| PLC | Schneider |
| Efficency | ≥98.5％ |
2. Technical Performance of Automatic JBox Installation & Soldering
1). Integrate the functions of J-box installation, busbaroverwhelming, busbar soldering and soldering inspection;
2). High compatibility, with 3 soldering heads, compatible with 210 cell
3). CCD visual positioning is used to detect the soldering position and the soldering head adapts to the welding position and automatically corrects deviation
4). CCD inspection to check the soldering effect, thesoldering torch is full
5). Good stability, simple operation, convenient switching
6). Compact structure, small footprint, high cost performance
