300MW Automatic Edge Taping Machine

Semi Automatic Tape Box Carton Sealing Machine
Product Description

300MW Automatic Edge Taping Machine

1. Equipment Parameterpment Parameter of 300MW Automatic Edge Taping Machine


Fully automated production line fully equipped and complete with all top of the range machines. Made to fit your production floor with only 3 workers needed in line.

Profit from a smooth and continuous assembly of solar panels, and today it is possible to keep the quality of the panels monitored at all times with an AI defects detection system plus our ECO MES system to monitor the production anytime and anywhere.


Item  Parameter
Panel Size (1680-2650)*(992-1500)mm
Cycle time ≤20S
Tape length Compatible with most tape specifications on the market
Tape width 25mm-40mm
Tape roll specifications diameter<300mm
panel positioning accuracy <1    mm
Alignment method Cylinder block
tape change time Convenient and fast, use time <2min
Edge taping effect No wrinkles, wavy lines, or damage
panel switching time ≤30min
Overall dimensions:(L*W*H) 4100X22900X1850 mm
Voltage 3Phase 5 wire 380V,50Hz,AC±20%
Power 6KW
Air Pressure 0.6~0.8Mpa


2. Technical Performance of 300MW Automatic Edge Taping Machine

1). The tape is compatible with most general-purpose tapes on the market with an outer diameter of less than 300mm.

2). The panel lifting part adopts four cylinders to lift, and the pressure wheel part can be fine-tuned, which is convenient for installation and debugging.

3). Edge taping accuracy: ≤±1mm (starting position).

4). Edge taping thickness: the thickness range of compatible panels is 4-7mm, and it can be customized beyond the range.

5). Edge taping length: Compatible with full-sealing tape and four-corner half-sealing tape.


3. Main Features of 300MW Automatic Edge Taping Machine

New ETS 4000 Stringer machine compatible with full, half-cut and triple-cut solar cells

Embedded cell laser cutting unit for half-cut cells

Production fully compatible with bigger solar cells: M6 (166mm), M10 (182mm), M12 (210mm) in full, half and third cut (tooling replacement is required for cells with different bus bar inter-axis);

Works with 5, 6, 9, 10, 11, 12 BB and 15BB and wires;

Fully automatic j-box application & soldering system;

Automatic bussing with centralized soldering unit for half-cut/twin peak panels;

Works with module's sizes up to 2.65m x1.5m (and 2.65m x1.5m as optional);

Cycle time: ≤20s

Taping Machine

Send Inquiry
For inquiries about our products or pricelist, please leave your email to us and we will be in touch within 24 hours.

Verify Code